Tri-Z

Hardware and Printed Parts List
This is still a WIP BOM list so things may be added at a later date

Extrusions

  • (2) 2040 Extrusions 405mm - "lowered Y axis"
  • (1) 2040 Extrusion 308mm - "Top Rear Motor Mount 2040"
  • (1) 2020 Extrusion 395mm - "Rear Vertical Extrusion 2020"
  • (1) 2020/20mm Tube 395-396mm - For the X axis

Idlers/Belts/Linear Rails

  • (1 set) Mellow Customized V-Core-3 GT2 Idler Kit Link
  • (1 set) GATES-LL-2GT 9mm belts 2M long Link
  • (2) MGN9H 400/350mm Linear Rails - For Y axis (Recommend 400mm) Link

Pins/Screws/Nuts

  • (4) Round Pins 5x40mm - For Motor Mount Idlers Link
  • (6) Round Pins 5x30mm - For Jointer and Front Idlers Link
  • (2) M5x35mm Screws - For Jointers
  • (2) M5x12mm Screws - For Front Idler Adjusters
  • (24) M5x10mm Screws
  • (4) M5 Locknuts
  • M5 Hammer/Roll in Nuts (Helps to have both but the choice is yours)

Printed Parts